Everest Solar Systems

Everest Solar Systems is dedicated to advancing solar energy installations throughout North America by offering cutting edge mounting systems for solar technology. Everest is a member of K2 Systems International Group, one of Europe´s market leaders in mounting systems, with more than 4 GW installed in over 110 countries worldwide.

The Everest Solar System principle

The MK3 slot nut is found in all Everest Solar systems as a central
connecting element of various applications in the mounting
rails.

 

Benefits for you

  • Easy to insert in all Everest Solar mounting rails:Lift the black installer-aid tabs, insert in MK3 channel in rail, turn clockwise 90-degrees.  
  • The MK3 slot nut is easy to install. Once it is locked, it prevents the accessories and rail from sliding down when positioned on a slant.

  • High tensile force is tested and proven to work for all rail with MK3 channels.
  • The MK3 slot nut can be found on Everest clamps, micro-inverter mounting kits, climber sets and other accessories that attach inside the rail channel.

Residential Roof Solutions

CrossRail System

CrossRail System

The CrossRail System features four rail profile types (CR 48-X, 48, 80) in both mill and dark.

  •  UL 2703 Listed for bonding and fire
  •  This system is the platform system for Everest – as the main dual rail system.
  •  Easily integrates with third party roof attachment products such as QuickMount PV
  •  L-foot provides adjustability and compatibility with common roof interfaces (comp, tile and metal)
  •  Compatible with the universal bonding CrossRail Mid and End Clamps (30-47 mm)

 

System CrossRail (PDF)

Installation Manual CrossRail (PDF)

CrossRail Shared Rail System

CrossRail Shared Rail System

The CrossRail Shared Rail System is designed to reduce roof attachments. Use the same components as CrossRail System with 2 added innovative components.

  • Compatible with all CrossRail rail profiles (CR 48-X, 48-S, 48, 80)
  • UL 2703 Listed for integrated bonding – use only 1 lug per sub-array
  • Pre-assembled Shared Rail Clamps have an AddOn that helps align the modules during installation
  • Use our EverFlash + Slide Kit for comp shingle roofs for adjustability during installation

Metal Roof Solutions

MiniRail XPRess System

MiniRail XPRess System

The MiniRail XPRess System is a short rail system designed for trapezoidal metal roofs as thin as 29 gauge.

  • The MiniRail XPRess Base is 17 inches long and has EPDM backing preattached
  • Each Base only requires 4 EJOT screws with an EPDM washer to reduce the chance of water intrusion
  • The deep MK3 channel allows the use of universal bonding CrossRail mid and end clamps
  • UL 2703 Listed for integrated bonding
  • Fast, simple installation

Flat roof solutions

CrossRail for Tilt Up System

CrossRail for Tilt Up System

The CrossRail Tilt Up System is pre-engineered for 7, 10 and 15 degree tilt. Use the same components as CrossRail System with 2 added innovative components.

  •  Use the same CrossRail rail (CR 48-X, 48-S, 48, 80) for tilt legs
  •  Adjustable Tilt Connector Set installs in seconds with 3 T-Bolts
  •  Adjustable Climber Set connects NS to EW CrossRails
  •  UL 2703 Listed for integrated bonding
  •  Fast, simple installation

CrossRail Tilt Up System Datasheet PDF

CrossRail Tilt Up Kit Assembly Guide PDF

D-Dome R^2

D-Dome R^2

The D Dome ² System is our third-generation Dome system for East/West racking. This system is our fastest commercial flat roof solution to install.

  •  Built with 5 major modular component
  •  Low-ballast, 10-degree fixed tilt system optimized for East/West orientation
  •  Designed to maximize module densit
  •  UL 2703 Listed for integrated bonding
  •  Fast, simple installation

Ground Mounted Systems

CrossRail Ground Mount System

CrossRail Ground Mount System

The CrossRail Ground Mount is optimized for small residential systems.

  •  This system uses CrossRail 80 and a combination of Hollaender Pipes
  •  The deep MK3 channel allows the use of universal bonding CrossRail mid and end clamp
  •  Pre-engineered system for: 4 rows in landscape, 20-35 degree tilt and moderate snow load and wind speeds
  •  Fast, simple installation